Jagwire 2x Elite Sealed Shift Kit

• The continuous liner running from the shift lever to the derailleur offers outstanding protection from dirt and debris
• Elite Polished Ultra-Slick cables are paired with Slick-Lube liners to minimize friction
• Lightweight XEX shift housing is nearly 30% lighter than traditional shift housing
• 5.0mm shift housing and 1.9mm inner liner may not be compatible with all frames and components

The 2x Elite Sealed Shift Kit uses a continuous liner that seals the system completely protecting it against dirt, mud and other contamination. Available in three colors, this system offers the ultimate combination of protection and low-friction performance for bikes with both front and rear derailleurs.

To ensure the best possible performance, we’ve paired Elite Polished Ultra-Slick inner cables with our Slick-Lube continuously-lubricated liners. This combination delivers precise cable movement and excellent durability.

Technology:
XEX - lightweight, braided steel strands around a Slick-Lube liner.

Sealed, Lubricated - Jagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud or anything else that can cause friction. But because the liner runs the full length of the cable, Ultra-Slick polished inner cables are used to keep friction to a minimum.

STS-EL - pre-stretched, highly polished, uncoated slick stainless steel spiral-bound cables.

Polished Ultra-Slick Stainless Steel - These ultra-slick stainless cables deliver the ultimate low-friction performance. Rather than using a coating, the Elite Ultra-Slick cables are polished to an even higher level than our Pro Slick cables. Compatible with any housing and lubricant, these Elite level cables deliver incredibly accurate, smooth performance.

What's included:

• 1 x 3200mm XEX Shift Housing
• 2 x 2300mm STS-EL Elite Polished Ultra-Slick Shift Inner Cables
• 2 x 2225mm Slick-Lube Liners
• 2 x LEX-SL 4mm Shift Housing Segments, 300mm
• 4 x Open Brass End Caps
• 7 x Open Alloy End Caps for 5mm Housing
• 2 x Open Alloy End Caps for 4mm Housing
• 2 x Pro Indexed Inline Adjusters (4mm/5mm)
• 2 x Housing Connectors (4mm/5mm)
• 2 x Cable Tips
• 2 x Grub Seals
• 2 x 5G Tube Tops
• 2 x Rotating Hooks

Technical specifications:

• Housing Construction: XEX
• Outside Diameter: 5.0mm
• Housing Length: 3200mm
• Liner: Slick-Lube
• Liner Length: 2225mm
• Cable Construction: STS-EL
• Compatibility: SRAM®/Shimano® Road and Mountain
• Front Cable Length: 2300mm
• Rear Cable Length: 2300mm