Millers Oils CFS 10W60 Motorsport Engine Oil - 5L

Part of the Competition Fully Synthetic range of engine oils, the CFS 10w60 incorporates Millers Oils’ original NANODRIVE low friction technology. The oil is formulated with 100% synthetic base fluids, including a blend of three esters combined with additive technology for maximum performance.

The CFS 10w60 is recommended for fast road and racing use. The oil is suitable for larger race and rally engines, with or without turbochargers, particularly when the engines are subject to severe and high stress conditions.

• Improved lubricity, reducing friction and enhancing the oil’s performance
• Lubricant film is more resistant to 'shear' and viscosity loss in highly stressed areas
• Greater load carrying capacity than mineral oil
• High film strength for ultimate protection
• Outstanding cold flow properties for reduced wear at start up
• Excellent thermal stability and oxidation resistance
• Grade : 10W/60
• Oil Type : Fully Synthetic Oil
• Size : 5L

• The CFS 10w60 is designed for use in competition or modified engines, and is suitable for all normally aspirated and turbo-charged engines from two litres upwards.
• The oil is formulated to protect both petrol and diesel competition engines operating under extreme conditions (e.g. long-distance racing, rallying in normally aspirated engines and rallying in turbo-charged engines).

• PERFORMANCE PROFILE:
• Manufactured to far exceed the requirements of API SL/CF and ACEA A3/B4
• Suitable for operating at 125°C with peak temperatures up to 150°C
• Offers exceptional protection, especially where subject to severe and high stress conditions
• Millers Oils have a range of products and services available for different types of vehicles. It is always best to make sure the product you are putting into your vehicle is the right one.
• Millers Oils technical helpdesk are available for bespoke questions including product selection, troubleshooting and general enquiries on 01484 475060 or email technical@millersoils.co.uk