Halfords Clear Coat Touch Up Brush 12ml
248371

4.0

(1)

kriya logo

Ways to apply

  • Build your basket and select Trade Credit at checkout.
  • Apply below to check your eligibility.

Activate your limit

  • If eligible, receive your Trade Credit limit instantly.
  • Authenticate your business with an ID check*.

*Only required on your first Trade Credit purchase.

Pay on account

  • Complete your purchase and pay on account at the end of the following month.
  • Enjoy no interest or transaction fees**.

**Late payments can impact your business credit

Already applied and have a limit? Approve your order via SMS to finalise your purchase.

Halfords Clear Coat Touch Up Brush 12ml
248371

4.0

(1)

£4.99
Only £4.74 with Motoring Club premium
  • Lasting gloss
  • Corrosion resistance
  • 12ml Brush

1 Select Quantity

For fitting, please change quantity to 1 and add each item and fit separately
Please contact our Business team for larger quantities
Due to your increased order quantity, please find your new collection time below

2 Check Availability

Use my location
Please select a valid postcode or location from list
Booking system unavailable, please try again later.
FREE Click & Collect
Home Delivery
Halfords Clear Coat Touch Up Brush 12ml
Halfords Clear Coat Touch Up Brush 12ml
£4.99

Halfords Clear Coat Touch up Brush

The Halfords Clear Coat Touch up Brush leaves a lasting gloss on freshly painted and older panels alike, for a scratch and shock-resistant finish that shines.

It can be safely used on a variety of surfaces away from your car too, including metal, aluminium, wood, glass, stone, and various types of plastic (with an appropriate primer and colour coat).

This lacquer locks in your results to leave your paintwork gleaming, and adds extra resistance to petrol, chemicals, and the weather for a finish that lasts. It has excellent filling properties to remove any light imperfections, and helps to prevent corrosion.

Directions for use:

  • Make sure your colour coat has been fully applied and is completely dry. You might need to lightly sand it (using P1200 wet & dry sandpaper) to buff out any imperfections or to add texture to your old paint to help the lacquer adhere. Take a tack cloth and remove any dust on the panel.
  • When lacquering an existing surface that has NOT been freshly painted, use a surface cleaner or degreaser and a lint-free cloth to remove any contaminants.
  • Use masking tape and masking paper to fully mask off the vehicle, leaving just the area to be lacquered exposed.
  • If you’re just doing a spot repair on a section of a single panel, leave an extra 30cm beyond the freshly painted colour edge so that the paint lacquer can be blended into the surrounding old paint.
  • Shake the pen for 1 minute, then apply a first thin “dust” coat to give best possible adhesion to the paint.
  • Where repairing part of a panel, avoid spraying all the way up to the masked edge, stopping just before to make the final blending easier.
  • Allowing time in-between coats, slowly build up the layers of paint until a uniform thickness and coverage is achieved (this should be 2-3 coats).
  • If you’re painting part part of a panel, wait until the lacquer is dry then use Halfords Fade Out Thinners to create a smooth transition between the edges of the old and new lacquer. This flattens the matte textured edges of the lacquer to seamlessly blend the repair.
  • Allow the paint to dry completely, following the time guidance on the can, before you reassemble, polish, wash, or use the vehicle.

 

CAUTIONS:
*The drying time can change depending on the ambient temperature, humidity and the thickness of the coats applied. Ensure the paint is fully dry before moving onto the next stage.
Take care when preparing older paint surfaces (pre-1970) as these may contain harmful lead.
Make sure you have enough ventilation in the area you’re painting in to prevent a harmful build-up of solvent gasses.

DANGER:
Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Use only outdoors or in a well-ventilated area. Buildup of explosive mixtures possible without sufficient ventilation. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe spray. Wear protective gloves and eye protection. Wash contaminated body parts thoroughly after handling. If medical advice is needed, have product container or label at hand. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Call a doctor if you feel unwell. Dispose of contents/container in accordance with regional regulations. Repeated exposure may cause skin dryness or cracking. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.

Halfords takes it’s responsibility as a retailer of age restricted products seriously. We recognise that some products we sell, such as knives/blades, spray paints and solvent based products can be harmful if misused or have a damaging influence in the community.

These restrictions are required by law and Halfords does not currently permit online sales of age restricted products direct to a customers home, place of work or other address.

It is still possible to order and then collect age restricted products from any Halfords store. This allows age verification to be made in the store and is in keeping with the Halfords Challenge 25 policy.

Hazards & Warnings
Warning: Flammable liquid and vapour
Warning: May cause respiratory irritation
Warning: May cause drowsiness or dizziness
: Toxic to aquatic life with long lasting effects