Loctite Rear-view Mirror Adhesive Kit

The Loctite Rear-view Mirror Adhesive Kit compensates for a differential thermal expansion of parts and therefore, is also recommended for a metal vent window handle and hinges.

It has a unique bonding system for rear view mirrors, car telephones and all window mounted aerials.

• Ideal for glass mounted phone and radio aerials
• Suitable for glass and metal only
• Bond in minutes
• Clean and easy to use

• For best performance bond surfaces should be clean and free from grease.
• To ensure a fast and reliable cure, Activator should be applied to one of the bond surfaces and the adhesive to the other surface. Parts should be assembled within 15 minutes.
• The recommended bondline gap is 0.1 mm. Where bond gaps are large (up to a maximum of 0.5 mm), or faster cure speed is required, Activator should be applied to both surfaces.Parts should be assembled immediately (within 1 minute).
• Excess adhesive can be wiped away with organic solvent.
• Bond should be held clamped until adhesive has fixtured.
• Product should be allowed to develop full strength before subjecting to any service loads (typically 24 to 72 hours afterassembly, depending on bond gap, materials and ambient conditions)

Halfords takes it’s responsibility as a retailer of age restricted products seriously. We recognise that some products we sell, such as knives/blades, spray paints and solvent based products can be harmful if misused or have a damaging influence in the community.

These restrictions are required by law and Halfords does not currently permit online sales of age restricted products direct to a customers home, place of work or other address.

It is still possible to order and then collect age restricted products from any Halfords store. This allows age verification to be made in the store and is in keeping with the Halfords Challenge 25 policy.