Dolphin Glaze

The Dolphin Glaze is a fine finishing glaze designed to eliminate pinholes and surface imperfections prior to painting. Its self-levelling formulation gives a smooth, ultra-fine finish which requires minimal sanding.

It is a two-component chemical liquid used for the final skimming of a polyester body filler putty repair or direct application onto minor imperfections on bodywork before overpainting. Also ideal for skimming over finished body filler, it offers high adhesion to galvanized, zinc-coated steel, cured paint and most plastics.

Aluminium, galvanised and zinc-coated substrates degrease and abrade with P120 paper. Do not apply over etch primer. Original paint surfaces (except for thermoplastic acrylics) – degrease and abrade with P180 grit paper. GRP – degrease and abrade with P80 grit paper.

• Easy to sand
• Premium self-levelling finishing glaze
• Bare metal – e.g. Steel, degrease and abrade with P80 paper

Halfords takes it’s responsibility as a retailer of age restricted products seriously. We recognise that some products we sell, such as knives/blades, spray paints and solvent based products can be harmful if misused or have a damaging influence in the community.

These restrictions are required by law and Halfords does not currently permit online sales of age restricted products direct to a customers home, place of work or other address.

It is still possible to order and then collect age restricted products from any Halfords store. This allows age verification to be made in the store and is in keeping with the Halfords Challenge 25 policy.